MECPOWER (H) is a highly aluminized cap sensitive primer. It can boost any non cap sensitive relatively weak - column Charge used for blasting in open pit mining. Its high V.O.D. helps to reduce Booster Column ratio resulting in economy in blasting operation. Its high density increases its sinking ability in slushy bore holes. It provides a high degree of safety from impact and friction. It produces minimum noxious fumes on blasting. Gel is rigid, well cross linked and resistant to Water.

APPLICATION :-
 
MECFORCE (H) being a large diameter explosive, it is suitable for Quarry and Mining operations. Because of its high power, it is most suitable to push away TOE-BURDEN. A perfect match of MECFORCE (H) is MECPOWER II or MECPOWER I. A suitable combination of these products can include maximum shattering effect to rock. It is suitable for hard to very hard rock or where large throw of rock is required.

TECHNICAL DATA:-

Density	: 1.15 TO 1.25 gm/cc
V.O.D.	: 4000 TO 4800 m/sec.
SENSITIVITY	: Sensitive to No. 6 or No. 8 Detonators, Detonating Fuse & Ray - det.
CLASSIFICATION	: CLASS II EXPLOSIVES
SUGGESTION	: Under Extreme temperature conditions, MECPOWER (H) like all other slurry explosive should be kept in its protective packing box until actual use.
PACKAGING	: Supplied in different sizes of strong polyethylene cartridges to meet different loading conditions.
	CARTRIDGE DIAMETER CARTRIDGE WEIGHT CARTRIDGE COUNT PER CASE OF 25 KGS 83mm 2.78 Kgs. 9 Nos. 125mm 6.25 Kgs. 4 Nos. 200mm 12.50 Kgs. 2 Nos.